Single path high accuracy model: Psonic-1
Primarily designed for gas service in a low pressure line, this model offers outstanding accuracy, sensitivity and zero pressure loss which attributable to its design. The measurable range extends down to extremely low flow rates hardly attainable with other types of flowmeters, and it contributes to energy saving in the process, too. Thanks to a built-in microprocessor (MPU), configuring or changing its settings in flow range, pulse units, parameters or beginning the diagnostic process is simple through communications from a remotely located point.
Specification
Nominal size | 50 to 300mm ( 350 to 600 available on demand ) | |
Flow velocity range | - 30 to + 30m/s (See General Specification Sheets for flow range of each meter size.) |
|
Operating temp. range | - 10 to + 80°C (explosionproof: - 10 to + 60°C) | |
Max. operating pressure | Standard: 1.96MPa (depends on process connection rating) High pressure (special): 10MPa |
|
Accuracy | ± 1% of RD plus ± 0.03% of FS | |
Converter | Output | Analog Pulse, bi-directional flow signal (open collector) |
Communication | RS-485 | |
Power supply | 85 to 264 VAC 50/60 Hz | |
Configuration | Explosionproof |