Single straight tube:STmassMK II
Thanks to a single straight tube construction, the STmass Coriolis mass flowmeter justifies its use in applications where problems associated with pockets in the fluid path and clogged flowtube must be avoided, or in clean processes where fluid material replacement and wetted parts cleaning are a matter of high priority. Furthermore, high vibration resistance and stability are attributed to our proprietary concentric dual-tube design. Pressuretight housing significantly increased the safety of operation, too. One obvious advantage is found in the measurement of liquid food, medical and chemical solutions.
Specification
Nominal size | 15, 25, 40, 50, 80mm ( 6 models ) | ||||
Process connection | JIS K RF flange ANSI / JPI 150 RF flange IDE ferrule |
||||
Applicable fluid | Liquid | ||||
Flow rate | Normal flow range | 0 to 12kg/min……..0 to 1200kg/min. | |||
Allowable flow range | 0 to 18kg/min……..0 to 1800kg/min. | ||||
Min. flow range | 0 to 1.2kg/min……..0 to 120kg/min. | ||||
Density range | 0.5 to 1.0 / 0.7 to 1.3 / 1.0 to 1.5g/mL | ||||
Operating temp. range | - 25 to + 130°C (explosionproof: - 20 to + 130°C) | ||||
Max. operating pressure | Max. 2.45MPa (Differs depending on process connection) | ||||
Accuracy | Flow rate | Factory calibration accuracy: ± 0.2% ± zero stability error | |||
Density | [Factory calibration (option) accuracy] ± 0.009g/mL (Not with size S010) |
||||
Wetted parts material | SUS316L, or SUS316L + Hastelloy-C (or MA22) for S015 and S025 only |
||||
Explosionproof | Combined explosionproof [Exd (ib) II BT4] | ||||
Output signal | Flow, temp., density, status |
Applicable Fluid:
Related to:
High performance: UltramassMK II
95MPa super high pressure: UltramassMK II CN004H
High performance for micro flows: ULTRAmassMK II MassFlex series
Inexpensive model for extreme low flows: CoriMate
Big bore size and high performance model: ULTRAmassMK II CN100