AGAR CORPORATION

ID200 Series

      The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam.

      A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.



SERIES OPTION 4-Wire (ID-200)
  2-Wire Hart (ID-200H)
  2-Wire Analog (ID-200A)


ID 200A Series
2 Wire 4-20mA Loop Powered Interface Detector

SYSTEMS:

  •    ■ ID-201A (½ Inch Shaft)
  •    ■ ID-202A (1 ¼ Inch Shaft)

Description

The ID-200A Series Interface Detectors are 2 wire, 4-20mA loop powered probes used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam. A wide range of models are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200A Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.

Operating Range
Emulsion Concentration 0-100% Hydrocarbon/ Water by Volume
Process Temperature Standard: 32°F to 300°F (0°C to 149°C)
Ambient Temperature -40°F to 185°F (-4°C to 85°C)
Pressure Rating Up to 3000 PSI
Material Of Construction
Standard Optional
Probe 316 Stainless Steel, Teflon & Peek Duplex, Hastalloy, Monel (Others available upon request)
Seals Aflas and Teflon Viton
Optional Process Connection
SH-2" SS 2" NPT Seal Housing, 316 Stainless Steel
SH-2" CS 2" NPT Seal Housing, Carbon Steel
CF-¾ SS ¾" NPT Compression Fitting, 316 Stainless Steel
CF-½ CS ¾" NPT Compression Fitting, Carbon Steel
Flanged Connections ANSI 150# to 1500#
Model Varations
ID-201A 1/2" shaft; Standard: 48" (4 Ft.); Minimum: 12" (1 Ft.); Maximum: 120" (10 Ft.)
ID-202A For probe lengths greater than 10 feet, sturdier 1-1/4” shaft assemblies from 5 foot sections via threaded connections.
Electrical Rating
ID-201A, ID-202A Probe Intrinsically Safe: Class 1, Div.1, Groups C & D, T3C (pending)
Power Required 6 Vmin @ 20mA
Relay Enclosures Weatherproof (N4X) NEMA 4X
Explosion Proof (N4/7) NEMA 4/7 Class 1, Div. 1, Groups C & D
Flame Proof (N4/7) NEMA 4/7 ATEX: II 2G Ex d[ia] IIB T6 (-20°C<Ta<+55°C)
Wiring Connections Probe Terminal Block #18 AWG Maximum Diameter
Output Options
ID-201A 4 - 20mA
ID-201A/RL Loop Powered/Relay
ID-201A/RL/LI Relay with local indicating lights; Amber = Oil, Blue = Water*
*Requires additional power

CERTIFICATIONS

CSA -US Canadian Standards Association /UL Specifications (pending) ATEX European Committee for Electrical Standardization GOST-R Russian Approval for Hazardous Areas and Accuracy JRIIS Japanese Research Institute of Industrial Safety

ID-201A Components: Probe, Seal Housing

Application of Agar

Genaral Application

Click here

Contact Us

Contact us via E-mail or phone

Click here



Copyright © 2011 OVAL (THAILAND) Ltd. All Right Reserved. Powered by SOS CHANNEL CO., LTD. E-mail : Support@SOSChannel.com