AGAR CORPORATION

ID200 Series

The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam.

A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.

SERIES OPTION	4-Wire (ID-200)
	2-Wire Hart (ID-200H)
	2-Wire Analog (ID-200A)

ID 200 Series

Interface Concentration Detector System

SYSTEMS:

■ ID-201 (½ Inch Shaft)
■ ID-202 (1 ¼ Inch Shaft)
■ ID-205 (Cable Mounted)

Description

The ID-200 Series Interface Detectors are used for interface measurement and control in all types of liquid/liquid and vapor/liquid separation processes including emulsions and foam. A wide range of models, process connections, and output options are available for the control of a variety of process installations such as Tanks, Decanters, Dehydrators, Desalters, Coalescers, etc. The ID-200 Series advanced control capabilities can be used to automate upset responses, antifoam and demulsifier chemical feed systems, and eliminate cross-contamination of separating phases.

Operating Range
Emulsion Concentration	0-100% Hydrocarbon/ Water by Volume
Process Temperature	Standard: 32°F to 300°F (0°C to 149°C) High-Temp: 32°F to 450°F (0°C to 232°C)
Ambient Temperature	-40°F to 131°F
Pressure Rating	Up to 3000 PSI

Materials Of Construction
	Standard	Optional
Probe	316 Stainless Steel, Teflon & Peek	Duplex, Hastalloy, Monel (Others available upon request)
Seals	Aflas and Teflon	Viton

Optional Process Connection
SH-2"/SS	2" NPT Seal Housing, 316 Stainless Steel
SH-2"/SS	2" NPT Seal Housing, Carbon Steel
CF-¼"/SS	¼" NPT Compression Fitting, 316 Stainless Steel
CF-¼"/CS	¼" NPT Compression Fitting, Carbon Steel
Flange Connections	ANSI 150# to 1500#

ID-201 Components: Probe, Seal Housing & Power Supply Nema 4/7 Enclosure

Model Variations
ID-201	½" shaft; Standard: 48" (4 Ft.); Minimum: 12" (1 Ft.); Maximum: 120" (10 Ft.)
ID-202	For probe lengths greater than 10 feet, sturdier 1 ¼" shaft assemblies from 5 foot sections via threaded connections.
ID-205	Shaft replaced by cable for suspension of antenna down through the top of the tanks, wells, platform legs, caverns, etc.

Electrical Rating
ID-201, ID-202, ID-205 Probe	Intrinsically Safe: Class 1, Div.1, Groups C & D, T3C ATEX: II 1G EEx ia IIB T4 (-40ºC<Ta<+70ºC) II 1G EEx ia IIC T5 (-40ºC<+65ºc)< td=""> <+65ºc)<>
Power Required	115/240 VAC 50-60 Hz or 12/24 VDC (±20%) Normal Power Consumption 3 Watts Maximum Power Consumption of 250 Watts (including lights)
PS-201 Enclosures	Weatherproof (N4X) NEMA 4X Explosion Proof (N4/7) NEMA 4/7 Class 1, Div. 1, Groups C&D
Wiring Connections	Flame-Proof (N4/7) NEMA 4/7 ATEX: II 2G Ex d[ia] IIB T6 (-20ºC<Ta<+55ºC) Barrier Terminal Block #18 AWG Maximum Diameter

Standard Output Options
ID-201/420	Powered 4-20 mA into 400 Ohms Maximum; 4 mA = Oil, or Lowest Water Content
ID-201/RL	Relay Contact 1A; 115V; NO and NC; (SPDT); Fail Safe On Water or Oil Adjustable Trip Point
ID-201/RL/420	Relay and 4-20mA Options
ID-201/RL/LI	Relay with Local Indicating Lights; Amber = Oil, Blue = Water

CERTIFICATIONS

CSA-US Canadian Standards Association /UL Specifications ATEX European Committee for Electrical Standardization GOST-R Russian Approval, ROSTECHNADZOR Safety JRIIS Japanese Research Institute of Industrial Safety

Application of Agar

Genaral Application

Click here

Contact Us

Click here

AGAR CORPORATION

ID200 Series

Application of Agar

Related to:

Contact Us